The DL-CAN-FD-R-FV is a ring coupler for CAN-FD networks. It enables redundant coupling of segments and supports both classical CAN and CAN-FD up to 8 Mbit/s.
Configuration is conveniently performed via an integrated 0.96" OLED display with control button.
To increase operational reliability, the device is equipped with two power inputs for redundant power supply.
A fault relay, the display, and status LEDs reliably indicate any errors that occur.
Feel free to ask us, we are here to help you with any question you may have.
Phone: +49 2762 9313-600
Contact us!
| Model | 6-P-ST | 13-MM-ST | 13-MM-SC | 13-MM-SC/BIDI | 13-SM-ST | 13-SM-SC | 13-SM-SC/BIDI |
|---|---|---|---|---|---|---|---|
| Order No. DL-CAN-FD-R-FV |
0 1000 8351 | 0 1000 8371 | 0 1000 8373 | 0 1000 8373-BIDI | 0 1000 8381 | 0 1000 8383 | 0 1000 8383-BIDI |
| Fiber Optic Connection | ST | ST | SC | SC | ST | SC | SC |
| Fiber Type | POF 980/1000 µm | Multi-Mode 62,5 (50) /125 µm | Single-Mode 9/125 µm | ||||
| Fiber Optic Budget | 12 dB | 13 dB | 17 dB | ||||
| Fiber Optic Range | 50 m (180 dB/km) | 5 km (1 dB/km) | 30 km (0,4 dB/km) | ||||
| Wave Length | 1300 nm | 1300 nm | 1300 nm 1550 nm |
1310 nm | 1310 nm | 1310 nm 1550 nm |
|
| Maximum Data Rate | Arbitration Bit Rate (CAN / CAN FD): 10, 20, 50, 100, 125, 250, 500, 800, 1000 kbit/s and Custom. Data Bit rate (CAN FD): 1, 2, 5, 8 Mbit/s and Custom. |
||||||
| Transmission Type | Arbitrated multi-drop bus (CSMA/CR) | ||||||
| Termination Resistor | Switchable, 120 Ω (split, 2× 60 Ω to ground with capacitor) | ||||||
| Maximum Data Cable Length | According to CAN specifications | ||||||
| Data Connector | 6-pin terminal block | ||||||
| Status LEDs | Power (green) / Data reception (yellow) / Status/Error (red) / Fiberview (red, yellow, green) | ||||||
| Operating Voltage | 12–30 V DC (SELV only, ES1 according to IEC 62368-1), other voltages on request | ||||||
| Current Consumption | 150 mA @ 24 V 300 mA @ 12 V |
||||||
| Galvanic Isolation | Withstand voltage: ≥ 500 V DC between power supply and CAN | ||||||
| Error Relay Contact | Up to 30 V AC/DC, 1 A; up to 60 V DC, 0,5 A (SELV only, ES1 according to IEC 62368-1) | ||||||
| Operating Temperature | -40 °C – +70 °C (Multimode und Singlemode mit ST oder SC) -20 °C – +55 °C (alle anderen) |
||||||
| Storage Temperature | -40 °C – +85 °C | ||||||
| Humidity | 5–95 % rF, nicht kondensierend | ||||||
| EMV | DIN EN 55032:2022-08-Klasse A DIN EN 61000-6-2:2019-11 |
||||||
| Weight | 500 g | ||||||
| Dimensions | 60 × 120 × 110 mm (B × H × T) | ||||||
| Housing / Protection Class | Stainless steel, powder coated / IP 40 | ||||||
eks Engel FOS GmbH & Co. KG
Schützenstrasse 2
57482 Wenden-Hillmicke
Germany
Phone: +49 2762 9313-600
Fax: +49 2762 9313-7906
Your contact person
Directly in touch with the right contact person.
the eks-blog
always informed!
